Plastiform Flexible Plastic Forms

Forming requirements for decorative concrete often involve radius and curved sections. Plastiform™ concrete forms can be used to set up curves as small as a 3-foot bend radius. The forms are very quick to setup using a cam-lock clamp that fastens the forms to stakes. The clamp can be twisted in anywhere along the slot on the back side of the form in a few seconds. And the forms have end connectors to link the forms together in long sections.

Plastiform™ is excellent for free-forming as the forms bend both ways so the stakes are always outside the poured concrete. Forming crews will quickly notice the forms lightweight construction as comparable with heavier wood materials. The smooth surfaces include silicon to help for easier cleanup especially when using a form release. All of the products are made with UV protection and will last for years and hundreds of uses.

Plastiform™ forms come in a variety of sizes (3.5", 4", 6", 8", 10", and 12" face height) and lengths (12" and 15" long). The stake spacing for the forms is every 2.5 to 3 feet and they can be stacked as well.

For information, call at (800) 358-3007 or visit the Plastiform Company Web site.

more ›››

This Issue

Concrete Decor, Vol. 2, No. 3
August/September 2002

Stay informed!
Enter your e-mail address
and subscribe to the
Concrete Decor Newsletter.

Other articles in this issue:
Faux Rocks & Concrete Landscaping
Concrete Surface Preparation
Concrete Burnishing
Henry Mercer's Concrete Castle
Concrete Floors: Slip Resistance
Decorative Concrete Consultants
Contractor Profile: Kia Ricchi
Manufacturer Profile: Custom Rock Intl.
Concrete Industry News
Concrete Association News
Product Profiles
Product News
Decorative Concrete Tip