Versatile Coating Products
Versatile Building Products has introduced five new coating products.
The 4001 High Performance "Wet Look” Waterbased Epoxy Clear Sealer is a two-component, high-gloss floor sealer designed to be used directly over concrete or decorative overlays of all types. 4001 replaces the need for a flammable lacquer sealer while improving the finished look of your decorative floor. The sealer is below 50 VOC.
The 5400 High Performance Waterbased Chemical Resistant Urethane is a two-component waterborne CRU that is available in a clear or pigmented formula and is below 50 VOC. Film build, gloss, abrasion resistance and chemical resistance are comparable to solvent-based systems. The water-based product is much higher in solids (62 percent) and boasts a thicker film build with no out-gassing problems than its predecessors. Available in gloss and matte finishes, 5400 provides an extra layer of topcoat protection to decorative work, protecting it from abrasion and wear in medium- to heavy-traffic areas. 5400 is fit for use on interior or exterior applications and it is resistant to hot tire marks.
Versa-Crete 1/4-Inch Stamped Concrete Overlayment is a polymer-modified stampable overlay system that is designed for easy installation. VBP has completely stabilized the polymers, resulting in a stamp mix that has plenty of working time. And Versa-Crete will not bubble up as a result of unstable polymers during application.
Polyurea 5000, a high-performance clear floor sealer, is new technology in the urethane arena that is 100 percent solids and allows film thickness to build in excess of standard systems. The cross-linking of the film in the cure makes it exceptionally tough and durable, helping it maintain its gloss far beyond that of comparable systems. The chemistry is based on polyurea and much attention has been given to the application characteristics in its design.
Roll On Rock, an MVE-resistant epoxy chip system, can be applied to concrete surfaces with as much as 15 pounds of MVE. This system includes a line of basecoat epoxies that do not require mechanical or chemical surface prep. If the concrete surface absorbs water, only cleaning will be required. VBP gives the applicator a choice of clear topcoats and stocks 1/4-, 5/8- and 1-inch chips in a wide range of colors.
|
