Floor Grinders

CS Unitec Inc. — EBS 180 Floor Grinder
CS Unitec’s EBS 180 7-inch walk-behind floor grinder prepares rough concrete and floors for a variety of resurfacing applications. It can be used to remove epoxy, glue, paint and other hard coatings.
Go to article ›››

Diteq Corp. — TEQ-Edge Grinder
With the DITEQ TEQ-Edge Grinder contractors can grind right up to the edge of a wall, eliminating the need for difficult, labor-intensive hand grinding.
Go to article ›››

Draygon Enterprises Inc. — X4 and X6 Electric Planetary Grinders
The Draygon X4 and X6 Wet/Dry Electric Planetary Grinders combine the benefits of electric grinders with planetary head technology and a full range of diamond tools for grinding and polishing concrete, terrazzo and stone floors. The X4 and X6 are also suitable for removing glue and other coatings.
Go to article ›››

Husqvarna Group — Dual Trac RG 2112
The Husqvarna Dual Trac RG 2112 floor grinder is suitable for a wide variety of applications, including grinding or cleaning concrete surfaces, leveling uneven joints and removing epoxies, high spots, mastics, thin-set and urethanes.
Go to article ›››

Kut-Rite — KR34GR Rotary Polisher
Kut-Rite’s KR34GR rotary polisher is equipped with three independently driven high-speed polishing pads that cover a 34-inch surface. The overlapping 12-inch pad drivers are capable of producing more than 4,000 square feet per hour per grit of extreme high-gloss polished floor.
Go to article ›››

Latta Inc. — Concrete Floor Grinder
Latta’s Concrete Floor Grinder combines advanced technology with a patented grinder design for preparing or polishing any old or new concrete surface.
Go to article ›››

Levetec Surface Preparation and Machinery LLC — Extrema Edging Machine
Levetec’s Extrema Edging machine uses a 220-volt, 2-horsepower mono-phase motor to power an edger suitable for professional applications.
Go to article ›››

MK Diamond Products Inc. — MK-SDG & MK-DDG
MK Diamond grinders are designed for concrete work, including smoothing rough areas and surface irregularities, feathering patches and cleaning industrial floors.
Go to article ›››

Werkmaster (B A Werk Industries Ltd.) — SuperColossos Planetary Machine
The SuperColossos Planetary machine uses Werkmaster’s Octi-Disc technology to grind, edge, polish and buff concrete surfaces to within 1/8 inch of a wall. With eight heads spinning at up to 4,000 rpm, the SuperColossos provides fast, powerful grinding in a maneuverable machine.
Go to article ›››