Arizona Polymer Flooring has announced the launch of three VaporSolve Moisture Remediation Systems, epoxy coating systems formulated to isolate moisture-sensitive flooring from all levels of concrete moisture.
VaporSolve systems can be used when concrete has a known moisture problem, when concrete dries too slowly to meet a specific construction schedule, or as a preventative measure when concrete doesn’t have a vapor retarder and future moisture conditions cannot be predicted.
The VaporSolve Basic System uses a single coat application of VaporSolve 100, a 100 percent solids epoxy. This system is applied when the concrete hasn’t been contaminated with reactive silicate curing compounds or densifiers.
VaporSolve Ultra System uses a water-based epoxy as a primer that gives deeper penetration and better adhesion when applied to silicate-contaminated concrete. The primer is finish-coated with VaporSolve 100, which greatly reduces the possibility of concrete outgassing.
Finally, VaporSolve Fresh Concrete System uses a water-based epoxy formulation to bond to concrete that’s six to 24 hours old. The finish coat is VaporSolve 100. This system eliminates water evaporation from the top of the slab.
(800) 562-4921
