Hilti has made the legendary HIT-RE 500 even better with the introduction of the Hilti Adhesive anchor system, HIT-RE 500 V3. This versatile system provides more than a 60 percent increase in published load performance, the lowest installation temperature in the industry, and has received ICC approval for cracked and uncracked concrete and all seismic zones.
>The HIT-RE500 V3 is the first and only epoxy to cure in freezing temperatures with a temperature range of 23?F to 104?F, and it has the shortest cure times for any epoxy. With the HIT-RE 500 V3, contractors will spend less time waiting for curing and greatly increase the versatility in cold weather. The HIT-RE 500 V3 is ideal for applications such as structural connections with post-installed rebar, substituting of misplaced and/or missing rebar and anchoring structural steel connections.
>HIT-RE 500 V3 also has the highest published load capacity of any epoxy in the industry. Along with HIT-HY 200, Hilti HIT-RE 500 V3 is the second ICC approved system with Hilti’s innovative SafeSet hollow drill bit.
>The SafeSet system with the hollow drill bit and VC20/40 vacuum allows contractors to perform chemical anchoring applications more efficiently and reliably with no required manual hole cleaning. When used with the new TE-YRT roughening tool, HIT-RE 500 V3 can be utilized in both cracked and uncracked concrete diamond-cored holes, and greatly reduces the cleaning typically required for cored-hole installation.
The HIT-RE 500 V3 system comes in 11.1-, 16.9- and 47.3-ounce foil packaging which is easy to dispense when using the electric HDE 500 or manual HDM 500 Hilti Dispensers.
(800) 879-8000
