Prosoco wants all your concrete polishing jobs to run smoothly. But they know that “smooth” isn’t always part of your best laid plans. For all the real-life mishaps that can crop up during a concrete floor project, let Prosoco and Metzger/McGuire equip you with the knowledge and tools to deal with them. Prosoco is holding their Polished Concrete Troubleshooting Training Oct. 27th-28th, 2015 at Prosoco in Lawrence, Kansas.
The cost to you is minimal – all you need to do is to get there. Prosoco will cover the rest, including meals and accommodations.
Just a few examples of what will be demonstrated at the training:
- How to execute a surface repair after applying a guard
- How to remove tape residue from a concrete floor
- How to change the color of a concrete dye mistake
- What to do if vapor drive causes your joint material to bubble
- How to get rid of oil, hydraulic fluids, rust, biological stains and more.
Training Schedule:
8:30-9:45 – Introductions & Presentation
9:45-11:15 – Metzger/McGuire
- Apply joint filler & repair material in a wet slab situation
- Repairs on a finished/polished floor
- Repairs of bubbled material from wet application completed earlier
11:15-12:00 – Surface Prep Demonstration – Prosoco
- Strip Curing Sealer using Cure & Seal Remover
- Strip Acid Damaged “Guard” with Wax & Cure Remover
- Grind stripped “Guard” area to remove acid etches
- Demonstrate First Cut product
12:00-1:00 – Lunch
1:00-3:00 – Surface Prep Demonstration (cont.) – Prosoco
- Demonstration of Grind N Fill product
- Remove paint stains with Cure & Seal Remover
- Remove rust stains with Concrete Floor Restorer
- Remove oil stains with Oil & Grease Stain Remover
- Demonstrate tire mark removal with Asphalt & Tar Remover
3:00-3:15 – Break
3:15-4:00 – Blended Densifier Demo
4:00-4:30 – GemTone Stain/LS on repaired floor
4:30-5:45 – Metzger/McGuire
- Pit Grout Application
- Repairs on a finished/polished floor
- Repairs of bubbled material from wet
5:45 – Dinner
Tue. Oct 27th
8:15-9:15 – Protective treatments application
9:15-9:45 – Grind-N-Fill on Pit Grout floor
9:45-10:00 – Break
10:00-12:00 – Metzger/McGuire
- General repairs
- Major joint repair & joint fillers
12:00 – Lunch and departures
