PlateAll, an innovative decorative metal coating, provides artisans access to a realm of the extraordinary. Mark Foreman of Bomanite of Northern California, an architectural craftsman and consultant, will attest to that. Mark applied PlateAll’s brass onto this ten-foot exterior logo in Northern California, creating a stunning effect. (www.bomanite-norcal.com, 877-653-9111)
PlateAll Metal Coating is a combination of a specialized polyester resin mixed with a composite metal powder and a catalyst. When the mixture is put into a conventional spray gun, it may be cold sprayed onto most any substrate, including concrete, creating a seamless metal surface of aluminum, brass, bronze, chrome, copper, iron, nickel-silver, or stainless steel. PlateAll may also be painted, rolled, or poured on as well.
The process of using PlateAll can be accomplished with ease and creates a permanent bond with the substrate when properly prepared for adhesion. Use PlateAll on stucco-coated EPS systems such as archways, crown moldings, cornices, columns, mantels, and other architectural elements. Create a magnificent bronze or brass design on a floor, a wall, or a concrete countertop that is “real” metal. Imagine PlateAll outdoors on a fountain, a concrete garden sculpture, or ordinary concrete garden tiles, perhaps with a copper or nickel-silver finish with a patina effect.For more information about PlateAll Metal Coating, call Cheryl in Sales and Marketing (925-945-6723; 888-756-2556), or call PlateAll (301-977-7701; 877-862-7501), and check out our website at www.plateall.com.