The world's foremost resource on decorative concrete
All the latest decorative concrete press releases. Includes information on new product releases for decorative concrete contractors. Plus, openings and closings, mergers and partnerships. Additionally, press releases include industry trends, new standards, conferences and other news of interest to the decorative concrete industry.
Concrete Decor is the industry’s go-to source, so be sure to look here for all the breaking news and trends in the decorative concrete industry.
General contractor Frank Mikowychok has invented a new tool, the Rattle Stick. The Rattle Stick is used for any kind of concrete finishing and connects to any kind of walking tool (bull floats, joint cutters, edgers) between the pole and the tool, sending a mild vibration into the tool to […]
Walttools has taken over the manufacturing of Rockmolds native Hawaiian stone texture skins for use in custom concrete texturing products. These unique, aggressive textures have been used to make faux rock, water features, stepping stones, custom paving and vertical stamping. Most recently, RockMolds skins were used in the new Patas […]
The Skudo Tack-Mat product line offers new concrete surfaces the same nonslip, durable protection against foot traffic, debris, UV and machinery. Commercial Skudo Tack-Mat has some key advantages: Versatility: Tack-Mat adheres to the surface to be protected, but its stick factor is gentle enough for it to be applied to […]
The new Junior Mud Mixer from Kraft Tool has a cast aluminum paddle 8.5 inches by 5 inches deep. The 7/16 inch steel shaft works in a slow speed half-inch drill. The rounded end is designed for better balance when mixing. It’s ideal for mixing drywall mud and texture material. […]
Koster has introduced two new floor systems: the Koster Chip Floor System and the Koster Quartz Floor System. Both systems are based on 100 peecent solids epoxy coatings with no VOCs. In order to achieve a decorative, durable and slip-resistant surface, the Koster Chip Floor System uses a colored chip […]
Nox-Crete’s new Duro-Floor Color System adds rich color to standard gray concrete. Duro-Floor Color System is designed specifically for use on diamond ground and polished concrete floors. Using Duro-Color dyes this system locks in the deep penetrating colors, hardens and protects from UV fading and stains. (800) 669-2738
Blastrac has redesigned the blast wheel. The new 8 1/2-inch blast wheel is larger in diameter, has new bidirectional blades curved higher and has 20 percent more blade surface. The larger diameter propels abrasives at a higher velocity, yielding a more aggressive blast. The new control cage design creates an […]
Mapei has introduced four new products to its line of cure-and-seals. The Mapecure AP is a solvent-borne, acrylic polymer curing, sealing and dustproofing compound designed for curing new concrete and sealing new and hardened concrete. This product is suitable for both interior and exterior use, and it creates a durable […]
Mapei has added four new densifiers to its line of products. Mapecrete Hard FS is a water-based magnesium fluorosilicate solution for horizontal interior concrete surfaces that chemically bonds with free lime in the concrete. This product works well on floors that are porous, readily absorptive, and only moderately hard. Mapecrete […]
Quikrete has added new concrete coatings and stains to its line of concrete products. Quikrete Etching Stains transforms plain concrete into a marble-like appearance with warm earth tones and unique shading. The acid-based stains react with the cement as they permanently penetrate the surface to create a unique, decorative, and […]
