The new Junior Mud Mixer from Kraft Tool has a cast aluminum paddle 8.5 inches by 5 inches deep. The 7/16 inch steel shaft works in a slow speed half-inch drill. The rounded end is designed for better balance when mixing. It’s ideal for mixing drywall mud and texture material. […]

Walttools has taken over the manufacturing of Rockmolds native Hawaiian stone texture skins for use in custom concrete texturing products. These unique, aggressive textures have been used to make faux rock, water features, stepping stones, custom paving and vertical stamping. Most recently, RockMolds skins were used in the new Patas […]

CTS Cement Manufacturing Corp. has announced the addition of Rapid Set V/O Repair Mix, a high performance, polymer-modified blend of Rapid Set Cement with additives and specially graded fine aggregates. It is for both exterior and interior use and can be used for general concrete repair, resurfacing, vertical and overhead […]

Quikrete has added new concrete coatings and stains to its line of concrete products. Quikrete Etching Stains transforms plain concrete into a marble-like appearance with warm earth tones and unique shading. The acid-based stains react with the cement as they permanently penetrate the surface to create a unique, decorative, and […]

Laticrete International, Inc., a manufacturer of construction solutions for the building industry, has announced the strategic asset acquisition of L&M Construction Chemicals, Inc. The acquisition will provide LATICRETE customers access to new products and technologies while expanding the company’s presence in the restoration and decorative concrete category. L&M produces a […]

The new Blastrac BMS-220ADB ride-on scraper is ideally suited for medium and large-sized applications with the added benefit of being battery-operated for increased versatility. It is very maneuverable with a zero turn radius. The Blastrac BS-110 floor scraper is a powerful self-propelled machine, ideal for indoor and outdoor medium-sized renovation […]

Blastrac has redesigned the blast wheel. The new 8 1/2-inch blast wheel is larger in diameter, has new bidirectional blades curved higher and has 20 percent more blade surface. The larger diameter propels abrasives at a higher velocity, yielding a more aggressive blast. The new control cage design creates an […]

Mapei has introduced four new products to its line of cure-and-seals. The Mapecure AP is a solvent-borne, acrylic polymer curing, sealing and dustproofing compound designed for curing new concrete and sealing new and hardened concrete. This product is suitable for both interior and exterior use, and it creates a durable […]

Mapei has added four new densifiers to its line of products. Mapecrete Hard FS is a water-based magnesium fluorosilicate solution for horizontal interior concrete surfaces that chemically bonds with free lime in the concrete. This product works well on floors that are porous, readily absorptive, and only moderately hard. Mapecrete […]

Drylok has introduced Concrete Toner, a concrete tone coat designed to even out discolorations, stains and blotches. Drylok Concrete Toner penetrates at an even ratio, eliminating uneven color. With Drylok Concrete Toner, you can enhance faded concrete with a little color without hiding the concrete texture or stamping. Drylok Concrete […]