Eliminator Concrete Remover, new from Cleform Tool Corp. and Congo Products, is a chemically active liquid designed to remove built-up, hardened concrete from most surfaces. It works well on concrete and mortar mixers, concrete forms, tools, screeds, trowels, hardware, ready-mix trucks and equipment.
Eliminator is highly concentrated and should be diluted with common tap water. If possible, immersion is the best application method. A light foaming or fizzing action will occur when it is applied. Soak and respray as needed. As buildup softens, remove it with a scraper or power washer.
The remover contains no muriatic, sulfuric, phosphoric, hydrofluoric or hydrochloric acids. Because of its less corrosive nature this product can be used on most metal, painted and plastic surfaces without damage. However, it may slightly etch clean metal surfaces, so an exposure test is recommended to insure compatibility. Environmentally friendly, it cleans up with soap and water and can be flushed down a drain.
? (800) 253-3676
www.cleform.com
