Blastcrete Equipment Co. now offers the Model RD6536 Skid Steer Pump Attachment. Featuring a universal design compatible with any skid steer, the 3-inch hydraulic squeeze pump is ideal for ICFs, block fills, form-and-pours, driveways, basements and various shotcrete applications. With the ability to pump grout materials, 3/8-inch shotcrete, and 3/4-inch structural concrete mixes, the RD6536 is a fast, efficient solution for contractors performing a variety of concrete and shotcrete applications. The unit offers a variable speed of up to 25 cubic yards per hour. Vertical pumping distance reaches 50 feet with the use of a rubber delivery line, while horizontal distance can reach up to 250 feet. A hydraulic agitator is included in the receiving hopper. The agitator’s continuous motion keeps the mix well blended, ensuring aggregate and sand stay evenly suspended throughout the mix. Not only does this result in high-strength concrete, it keeps the aggregate and sand from settling to the bottom of the hopper and clogging near the suction area. To relieve pressure buildup clogs and eliminate potential damage to the pump, the RD6536 can be run in both forward and reverse. Hydraulically powered controls are located on the pump and operate both agitator and pump speed. Cleanup on the RD6536 squeeze pump is fast and hassle-free. Using just water and a sponge ball, the pump can be cleaned out in approximately five minutes. ? (800) 235-4867 ? www.blastcrete.com
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognizing you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.