Aztec Products has redesigned the Aztec Sidewinder, an ultrahigh-speed stripping and scrubbing machine. A new transport wheel attachment for the Sidewinder makes the 400-pound-plus machine even easier to unload and maneuver around the job site.

Boride Engineered Abrasives has developed and designed a diamond wheel that uses Blue Star Diamond Technology to grind and polish edges on concrete floors. The Easy Edge is available in 4-, 5- and 7-inch wheels in grit sizes of 30, 50, 100, 270 and 400. It has a quick-mounting system […]

CS Unitec’s new EBS 180 H 7-inch hand-held concrete grinder removes epoxy, paint and other coatings. It also prepares new concrete surfaces before the application of new paints or coatings. This grinder is solidly built with a 20-amp, 2,500-watt motor to enable a high load capacity running 7-inch diameter diamond […]

New from Boscaro and Eagle West Cranes & Equipment is a multifunction five-in-one concrete bucket. The central-discharge concrete bucket features a counter-sprung box gate, which simplifies its use, especially when filling column forms. The discharge slide can be set for in or out of service without removing it, although it […]

Bosch has introduced the RH228VC Bulldog Xtreme Max Rotary Hammer.A longer piston and impact bolt, combined with a precision-machined striker, increases the hammer’s efficiency, which, in turn, increases both speed and power. Indirectly, the more efficient operation also enhances durability, because the RH228VC strikes harder and drills faster with only […]

Applied Diamond Tools is offering 5-inch JHX Dry Diamond Polishing Pads. The JHX dry metal-bond diamond polishing pads are designed to polish hard granite and concrete countertops. Velcro- backed and color-coded, they can be used wet or dry at a maximum speed of 4,500 rpm. Each pad is 2 1/2 […]

Pacific Concrete Images has created a new series of rubber-mat stamping tools. The Municipal Series of concrete stamping tools is specially designed to combine the patterns and impressions formerly created by aluminum or metal stamping tools with the ease and flexibility of rubber mat stamping. With almost twice the coverage […]

The Doosan DXB260H hydraulic breaker features two-speed control of breaker frequency for improved efficiency in demanding demolition and rock- breaking applications. Delivering up to 600 blows per minute, the 5,400-pound DXB260H is designed for use with excavators in the 27- to 37-metric- ton weight range, specifically the Doosan DX300LC and […]

Billy Boots has expanded distribution of the Cruiser boot. Molded from lightweight EVA resin, the Cruiser has no seams to leak and no buckles to fail. At just 2.1 pounds per pair, Cruisers are virtual featherweights but still tough enough to stand up to challenges like rebar wire ties.

CS Unitec’s CS 1225 H wet/dry HEPA vacuum captures 99.999 percent of particles up to 0.1 microns, exceeding EPA filtration standards. The vacuum weighs less than 25 pounds and includes a hose adapter to easily connect portable power tools.