New cure-and-seals from Mapei

Mapei has introduced four new products to its line of cure-and-seals.

The Mapecure AP is a solvent-borne, acrylic polymer curing, sealing and dustproofing compound designed for curing new concrete and sealing new and hardened concrete. This product is suitable for both interior and exterior use, and it creates a durable acrylic membrane that helps cement to fully hydrate and maximizes the strength and durability of the concrete.

Mapecure CS is a 100 percent pure acrylic polymer concrete sealer designed to protect and enhance cured concrete. Mapecure CS produces a nonyellowing satin finish that enhances the appearance of decorative concrete. This product forms a durable surface against the damaging effects of water, traffic and salt penetration.

Mapecure UV is a solvent-based, ultraviolet-stabilized, styrenated acrylic copolymer sealer especially designed for curing fresh concrete. Mapecure UV contains more than 25 percent solids as well as special UV stabilizers. This product can be used on both interior and exterior concrete surfaces.

Mapecure DR is a water-based, liquid, membrane-forming curing compound for freshly placed concrete. Formulated from dissipating hydrocarbon resins, it is designed to retain water in the concrete for proper hydration, then to begin breaking down and deteriorating when exposed to traffic, sunlight and weathering. Mapecure DR also reduces surface shrinkage and cracking.

(800) 992-6278

Got more questions about your project?

  • Drop files here or
    Accepted file types: jpeg, jpg, gif, png, pdf, Max. file size: 50 MB.
      Allowed formats: jpeg, jpg, gif, png, pdf
    • How would you like us to respond?

    • Note: Some questions will be published anonymously with their answers at the end of this story to share with other readers.