New Coating System from CFI

A long picture of a mall where a new coating system was installed

Coatings for Industry, Inc. (CFI) has introduced its new MTF-8 Resinous Floor Coating System. This system delivers a unique combination of designer colors and quick return-to-service. This system has proven especially well-suited for high-visibility, retail, restaurant, and other commercial floors with busy foot and light-wheeled traffic.

Details on this new system are available immediately at cficoatings.com/MTF-8_Delivers.

The new system was initially developed for a Fortune 500 retail chain to meet their needs for durability, ultra-modern looks, and fast return-to-service. “They wanted a floor that looked good and reflected their brand,” said Lou Frank, Director of Business Development of CFI. “But they also needed it to be ready for use as quickly as possible, typically with a 2-night turnaround. And it had to stand up to constant foot and light-wheeled traffic.”

Along with quick return-to-service, the design magic of the MTF-8 System comes from the use of micro-tech flake used to define 100% of the floor’s color. A full spectrum of background colors can be combined with accent flake colors. This offers owners and their architects virtually limitless combinations of hue and accent colors.

a cut look of the new new MTF-8 Resinous Floor Coating System by CFIFrom prep time to completion, the MTF-8 can be ready for use in as little as 48 hours, including 12 hours of use during that time, if needed. That takes precious time out of the construction or renovation schedules for facilities that depend on either remaining open during the daytime or opening quickly after construction. CFI’s MTF-8 system is ideal for grocery stores, pharmacies, restaurants and other retail applications, as well as schools and institutional buildings.

The MTF-8 system consists of three components:
  • Primer – Selected according to environmental needs and condition of the concrete.
  • WearCOAT-481HP – A light-stabilized, 100 percent solids epoxy clear mid-coat with micro-tech flakes broadcast per the designer’s specifications.
  • WearCOAT-2332 – A high-gloss, extremely low-VOC (<5 g/l) urethane topcoat that locks in the broadcast flakes and provides a durable, stain-resistant finish.

The new MTF-8 System has a special formul to be a low-odor, fast-cure system for application in indoor environments. It resists marks and especially staining from common spills like mustard, red wine, even nail polish remover.

For more information, get the Technical Data Sheets for the MTF-8 system components. You can also see the entire lineup of CFI Flooring Systems free at www.cficoatings.com, or call +1 (215) 723-0919.

About Coatings for Industry

Coatings for Industry, Inc. (CFI) has been formulating coatings for industrial, commercial and aerospace applications worldwide for nearly 50 years. Reflecting a commitment to quality and innovation, the company also maintains an R&D staff of chemists and metallurgists, and produces products under an ISO-9001 certified QMS. CFI’s family of coatings has a trademark under the names ALSEAL, Siloxseal, and WearCOAT. For more information about CFI, visit www.cficoatings.com.

Got more questions about your project?

  • Drop files here or
    Accepted file types: jpeg, jpg, gif, png, pdf.
    Allowed formats: jpeg, jpg, gif, png, pdf
  • How would you like us to respond?

  • Note: Some questions will be published anonymously with their answers at the end of this story to share with other readers.